Mazda TB-50 2 inch lift kit Coil - Block
- Model No.
- FDBT-50-2 CB
- Made in
- Request for Quotation
- CB:coil + space block
for purchasing and shipping, please contact email@example.com
|Mazda BT-50 True Suspension Lift Kit 2"Inches|
|2 x Coil Spacers (2 Inch Lift) 1 Inch Coil|
|2 x 2" Rear Lift Leveler Blocks|
|4x Special Prolonged Leaf Spring U-Bolt 9"|
|Packing Materials / Box|
TRUE SUSPENSION LIFT KIT
GAIN REAL GROUND CLEARANCE / 2" FRONT + 2" BACK
2" (= approx. 50mm) FRONT
2" (= approx. 50mm) REAR
COMBO SUSPENSION LIFT KIT
for Mazda BT-50 (2012,2013, 2014, 2015 ,2016)
FITS ALL NEW Mazda BT-50 2011, 2016- MODELS
FOR 2 DOORS SINGLE CAB, 2 DOORS OPEN CAB AND 4 DOOR DOUBLE CAB
Lifts your Mazda BT-50 to allow for more ground clearance and bigger tires!
Our kits provide you with all the necessary parts to lift your truck! This is the best high quality lift kit for any truck enthusiast by using existing suspension components rather than cutting and welding costing you hundreds of dollars on top of the kit itself.
Pls. DO NOT CONFUSE OUR COMBO SUSPENSION LIFT KITS WITH CHEAP BODY LIFT KITS
Body lift kits only lift the body off the frame of a car and therefore offer no performance advantage other than tire c learance.
Body lifts kits lead to the following problems:
Ugly exposure of trailer hitches, ugly gaps between trucks frame and cab/bed, need to extend/adjust fuel filler hoses, steering column, engine cooling fan air guiding parts, etc.
Our suspension lift kit offers you clear performance advantages
by spacing down your vehicles factory suspension.
This way you will get:
- Enhanced looks
- Increased tireclearance
enabling you to mount lager wheels/tires
- Increased ground clearance
resulting in improved off-road capabilities
Contents of our DAYTONA-CPSCOMBO SUSPENSION LIFT KIT:
- 2x coil spacers
CNC-manufactured – for 2” front lift**
- 2x 2" Rear Lift Leveler blocks
manufactured from heavy duty S235JR construction steel with antirust coating
- 4x special prolonged leaf spring U-bolts
made from industrial grade carbon steel alloy
- All required nuts and fasteners
- Detailed English PDF PictureDiagram installation instructions .
** IMPORTANT NOTE: The lift / coil spacerthickness ratio is not 1:1. This means that the lift achieved lift height ismuch greater than the actual thickness of the coil spacers. The reason for thisis that the lower control arm compounds the amount of lift due to its angle andlength. Front 2"represents lift amount, NOT the spacer thickness. This lift kit is designed to give you anoverall lift of up to approximately 2 inches (50mm) front / 2inches (50mm back). This is the recommended maximumwhich you can lift your vehicle without affecting your vehicles drivingcharacteristics in a negative way. Analignment is always recommended after altering the height of your vehicle. Therear lift requires that you add the blocks on the 4WD models and 2WD models . Installation should only beperformed by trained professional
Our Full Lift Kits are precisionengineered to lift and or level your truck. Our offerings include various sizecombinations for the front and rear so you can change or customize your truckto the required ride height. If there’s something you require, please messageus and we’ll be happy to put an offer together for you!
Second generation (2011–2016)
Mazda BT-50 SDX 2.2 TDCi 4x4
A full model change of the Mazda BT-50 wasrevealed on October 2010 at the Australian International Motor Show It is basedon the Ford Ranger T6).
While the BT-50 version was designed by a Mazdateam based at Ford Australia's design center in Melbourne, both Ford and Mazdaworked independently. Of the exterior panels, only the windscreen, roof, andrear screen are common between the Ranger and BT-50, although the underpinningsare largely the same.] Mazda BT-50 is produced in Thailand and South Africa.
A revised BT-50 for the 2016 model year willdebut in July 2015. The facelift is presumed cosmetic only without any changes inengine specifications.
- Minimum Order:1